REX Delta 4 Manuel d'instructions télécharger pdf (Page 2)

In order to use the device for a maximum long time and without problems, as well as to

be able to use all of its options, please read carefully the whole instruction manual and

observe the directions in it.

Your Delta4 is shipped with these parts:

- Upper Pole Assembly – fully assembled, including upper pole stem with

handle grip

- Middle pole assembly with pole lock

- lower pole - made of wood in order to not disturb the work of the coil.

- 27 cm DD search coil

- electrical set box – made of extremely strong plastic, including 10 AA

batteries NiMH 1,2V/1000mAh or 2700mAh.

- 220V automatic charger

- Operation instruction manual

Warranty card

If any of these items are missing, immediately inform us, or our autorized

dealer where you purchased your detector.

Assembling the Delta4 is simple and you don’t need any special tools. Just

mount the search coil on the lower pole assembly, connect the pole assemblie s

together, adjust the pole length, wrap the excess cable around the pole and plug

the cable into the control unit. Finally adjust search coil angle to your

preference and you are ready.

NOTE: Do not allow the cable to flop loosely over the search coil. Since the

detector is sensitive enough to „see― the tiny wires in the cable, a floppy cable

can cause false signals as the search coil senses the moving wires.

1 2 3 4 5 6 7 ... 11 12

Pas de commentaire

REX Delta 4 Manuel d'instructions Page 2